PCB Drilling Entry Sheet / Coil 1100 H18

• Alloy: 5005, 5052, 5083, 6061, 8011
• Thickness: 0.15-300mm
• Width: 500-2200mm
• Length: 800-8000mm
• Material: Aluminum
• Transport Package: Export Standard, Wooden Pallet or Wooden Case
• Model NO.: Alloy: 1050, 1060, 1100, 1200, 3003
• Specification: ASTM B209, SGS
• Trademark: GY
• Origin: Guangdong, Yunfu City
• HS Code: 7606
• Production Capacity: 5000 Tons Per Month

Product Description

PCB Drilling Entry Sheet / Coil 1100 H18:
Product Description
1), Alloy we supply:
1050/1060/1070/1100/3003/3004/3103/3104/5005/5052/5083/5182/5754/6005/6061/6063/8011, etc.

For the above-mentioned alloy, you may be interested in:
CC aluminum sheet: Means Continuous Casting coil, it can not be used for deep drawing and anodising, but it can be bend over 90 degrees.
DC aluminum sheet: Means Direct casting coil, it can be used for deep drawing and anodising.

2), Size we supply:
Thickness: (0.15-6.0)mm, (8-30)mm, maximum.
Width: 1000/1220/1250/1300/1350/1500/2000mm/2500mm(maximum), and other special width.
Length: 2000/2400/2440/2500/3000/4000/5000/6000mm, etc.
Thicnk tolerance: +/-0.01mm

3), Temper:
HO/H14/H24/H16/H18/H19/H32/H111/H112/T6/T651, etc.

4), Packing:
For Sheet Packing:
2-2.5mts per pallet, standard international export packing,
For Coil Packing:
Eye to wall or Eye to Skype packing, 2-3mts per coil or 5-7mts per coil,
Coil ID: 505MM/508MM

Customer may require interleaf papers into sheets or require blue protective PE film on sheet&coil surface.

5), Coil/ sheet surface requirement:
No scratches, white corrosion, water stain, black stain marks, oil stain or streak marks.
6) Ending Application:
Construction, decoration, electronic products, wall Cladding, Truck body, Signboard, Insulation, Ceiling, aerospace, aviation, household appliance, lighting, and some other areas, etc.

Terms and conditons:
1, Trade temr: CIF/CFR/FOB/EXW
2), Payment term: TT/West Union/100% Irrevocable L/C at sight
3), Shipment: It will cost us about 25-30 days after 30% deposit reaching our USD bank account(TT) or after we receive the L/C copy.
4), MOQ: 5-7tons for each thickness.
5), Quantity tolerance: +/-10% of total quantity as confirmed PI

Alloy	Si	Fe	Cu	Mn	Mg	Cr	Ni	Zn		Ti	Other		Al
											Single	Total
1060	0.25	0.35	0.05	0.03	0.03	_	_	0.05	V:0.05	0.03	0.03	_	99.6
1050	0.25	0.4	0.05	0.05	0.05	_	_	0.05	V:0.05	0.03	0.03	_	99.5
1100	Si+Fe:0.95		0.05~0.40	0.05	_	_	_	0.1	_	_	0.05	0.15	99
1200	Si+Fe:1.00		0.05	0.05		_	_	0.1	_	0.05	0.05	0.15	99
3003	0.6	0.7	0.05~0.20	1.0~1.5	_	_	_	0.1		_	0.05	0.15	R
3004	0.3	0.7	0.25	1.0~1.5	0.8~1.3	_	_	0.25		_	0.05	0.15	R
3005	0.6	0.7	0.3	1.0~1.5	0.20~0.6	0.1	_	0.25		0.1	0.05	0.15	R
3105	0.6	0.7	0.3	0.30~0.8	0.20~0.8	0.2	_	0.4		0.1	0.05	0.15	R
5005	0.3	0.7	0.2	0.2	0.50~1.1	0.1	_	0.25	_	_	0.05	0.15	R
5052	0.25	0.4	0.1	0.1	2.2~2.8	0.15~0.35	_	0.1	_	_	0.05	0.15	R
5083	0.4	0.4	0.1	0.40~1.0	4.0~4.9	0.05~0.25	_	0.25	_	0.15	0.05	0.15	R
5086	0.4	0.5	0.1	0.20~0.7	3.5~4.5	0.05~0.25	_	0.25	_	0.15	0.05	0.15	R