Transformers Winding Aluminum Strip:
Product Description
1), Alloy we supply:
1050/1060/1070/1100/3003/3004/3103/3104/5005/5052/5083/5182/5754/6005/6061/6063/8011, etc.
For the above-mentioned alloy, you may be interested in:
CC aluminum strip/coil: Means Continuous Casting coil, it can not be used for deep drawing and anodising, but it can be bend over 90 degrees.
DC aluminum strip/coil: Means Direct casting coil, it can be used for deep drawing and anodising.
2), Size we supply:
Thickness: (0.15-4.0)mm, Width: (20-1500)mm and other special width.
Length: Strip/Coil
Thicnk tolerance: +/-0.01mm
3), Temper:
HO/H14/H24/H16/H18/H19/H32/H111/H112/T6/T651, etc.
4), Packing:
For Sheet Packing:
2-2.5mts per pallet, standard international export packing,
For Coil Packing:
Eye to wall or Eye to Skype packing, 2-3mts per coil or 5-7mts per coil,
Coil ID: 505MM/508MM
Customer may require interleaf papers into sheets or require blue protective PE film on sheet&coil surface.
5), Strip/Coil/ sheet surface requirement:
No scratches, white corrosion, water stain, black stain marks, oil stain or streak marks.
6) Ending Application:
Construction, decoration, electronic products, wall Cladding, Truck body, Signboard, Insulation, Ceiling, aerospace, aviation, household appliance, lighting, and some other areas, etc.
Terms and conditons:
1, Trade temr: CIF/CFR/FOB/EXW
2), Payment term: TT/West Union/100% Irrevocable L/C at sight
3), Shipment: It will cost us about 25-30 days after 30% deposit reaching our USD bank account(TT) or after we receive the L/C copy.
4), MOQ: 5-7tons for each thickness.
5), Quantity tolerance: +/-10% of total quantity as confirmed PI.
Alloy |
Si |
Fe |
Cu |
Mn |
Mg |
Cr |
Ni |
Zn |
|
Ti |
Other |
Al |
Single |
Total |
1060 |
0.25 |
0.35 |
0.05 |
0.03 |
0.03 |
_ |
_ |
0.05 |
V:0.05 |
0.03 |
0.03 |
_ |
99.6 |
1050 |
0.25 |
0.4 |
0.05 |
0.05 |
0.05 |
_ |
_ |
0.05 |
V:0.05 |
0.03 |
0.03 |
_ |
99.5 |
1100 |
Si+Fe:0.95 |
0.05~0.40 |
0.05 |
_ |
_ |
_ |
0.1 |
_ |
_ |
0.05 |
0.15 |
99 |
1200 |
Si+Fe:1.00 |
0.05 |
0.05 |
|
_ |
_ |
0.1 |
_ |
0.05 |
0.05 |
0.15 |
99 |
3003 |
0.6 |
0.7 |
0.05~0.20 |
1.0~1.5 |
_ |
_ |
_ |
0.1 |
|
_ |
0.05 |
0.15 |
R |
3004 |
0.3 |
0.7 |
0.25 |
1.0~1.5 |
0.8~1.3 |
_ |
_ |
0.25 |
|
_ |
0.05 |
0.15 |
R |
3005 |
0.6 |
0.7 |
0.3 |
1.0~1.5 |
0.20~0.6 |
0.1 |
_ |
0.25 |
|
0.1 |
0.05 |
0.15 |
R |
3105 |
0.6 |
0.7 |
0.3 |
0.30~0.8 |
0.20~0.8 |
0.2 |
_ |
0.4 |
|
0.1 |
0.05 |
0.15 |
R |
5005 |
0.3 |
0.7 |
0.2 |
0.2 |
0.50~1.1 |
0.1 |
_ |
0.25 |
_ |
_ |
0.05 |
0.15 |
R |
5052 |
0.25 |
0.4 |
0.1 |
0.1 |
2.2~2.8 |
0.15~0.35 |
_ |
0.1 |
_ |
_ |
0.05 |
0.15 |
R |
5083 |
0.4 |
0.4 |
0.1 |
0.40~1.0 |
4.0~4.9 |
0.05~0.25 |
_ |
0.25 |
_ |
0.15 |
0.05 |
0.15 |
R |
5086 |
0.4 |
0.5 |
0.1 |
0.20~0.7 |
3.5~4.5 |
0.05~0.25 |
_ |
0.25 |
_ |
0.15 |
0.05 |
0.15 |
R |